Page 1 of 1

Stalls out past half throttle

Posted: Sat Oct 24, 2015 9:27 am
by redyute
99 civic 4 door with a3 swap running kpro 4, using prb cal coppied the tables off of base kal. At idle i can rev to redline, but soon as i start driving the engine stalls out or more like boggs down soon as i go past around half throttle, almost like she stalls out completely if i hold the throttle past that point, but soon as i release she is fine.So i thought i had a bad tps but i have addjusted it so i have .5v closed and i get 4.4v wide open, ive run out of ideas at this point so here i am open to try out any ideas you guys may have, she drives fine if i dont go past half throttle lol.

Re: Stalls out past half throttle

Posted: Mon Oct 26, 2015 10:15 am
by Spunkster
You need to post the calibration as well as a datalog showing the problem.