Hondata

Hi,

I want to use the Aux 1 output for radiator fan control.

Output : A20 PCS

I put some conditions for the activation (Function : Generic output) :
Engine speed : min - 800RPM / Max : 9517RPM
Engine load : min - 100mbar / 17520mbar
Throttle : 0%
Vehicule speed : Min - 0 / Max : 158mph
Air temperature : -8°C
Water temp : Min : 0°C / Max : 150°C (just for the test)

But it doesn't work with my conditions. When I test with the test mode, It's working...
I don't understand why I can't control the fan with theses conditions!

Hondata V2, Soft : Smanager 2.3.7.0

Thanks a lot.

Rom.

Can you post the calibration and a datalog?

Here, I'll find the map.

Thanks.

The arming input needs to be 'Always On'.