Page 1 of 2
S300 will not datalog correctly.
Posted: Mon Aug 03, 2015 11:27 pm
by so_vayne
I have an s300 v3 and I can get it to datalog with the laptop but when it records based of parameters the sensors are all haywire. What could be the possible causes for this?
Re: S300 will not datalog correctly.
Posted: Tue Aug 04, 2015 6:32 am
by Hondata
Download and install the latest software version (currently 2.4.4) and then re-upload to your ECU.
Re: S300 will not datalog correctly.
Posted: Fri Aug 07, 2015 10:57 pm
by so_vayne
I did, and similar results.
Re: S300 will not datalog correctly.
Posted: Sat Aug 08, 2015 7:45 am
by Hondata
Let me be more specific.
- Download and install the latest software version (currently 2.4.4)
- Re-upload to your ECU.
- Delete all datalogs on the s300
Re: S300 will not datalog correctly.
Posted: Sat Aug 08, 2015 8:54 am
by so_vayne
That is exactly what I did.
Re: S300 will not datalog correctly.
Posted: Sun Aug 09, 2015 12:02 pm
by so_vayne
Same Issue still.
Re: S300 will not datalog correctly.
Posted: Sun Aug 09, 2015 12:33 pm
by AREA876
Are you datalogging with PC and recording with ECU at the same time?
Re: S300 will not datalog correctly.
Posted: Sun Aug 09, 2015 11:02 pm
by so_vayne
No, if I datalog with the ECM based on parameter set within the ecm is when I have the issue.
Re: S300 will not datalog correctly.
Posted: Mon Aug 10, 2015 9:47 am
by Spunkster
Has J12 been cut on the ECU?
Re: S300 will not datalog correctly.
Posted: Tue Aug 11, 2015 12:24 am
by so_vayne
Yes, this ECU and Hondata came from KS Tuned. I have verified it is installed correctly.
Re: S300 will not datalog correctly.
Posted: Tue Aug 11, 2015 11:41 am
by Spunkster
What is the serial number on the s300 board inside the ECU?
Can you post a picture of the ECU as well?
Re: S300 will not datalog correctly.
Posted: Tue Aug 11, 2015 5:50 pm
by so_vayne
I'm currently away from home but I will be home Thursday evening and will post both then. Thank you.
Re: S300 will not datalog correctly.
Posted: Thu Aug 13, 2015 10:13 pm
by so_vayne
Done, And done.
Re: S300 will not datalog correctly.
Posted: Fri Aug 14, 2015 9:17 am
by Spunkster
Has this s300 ever worked in this ECU?
Re: S300 will not datalog correctly.
Posted: Fri Aug 14, 2015 9:31 pm
by so_vayne
It has datalogged correctly. It runs correctly. No issues.. Just will not datalog correctly.