Hondata

V2.4.0 (16 June 2015)

• USB drivers updated to v1.0.3 (Microsoft Hardware Certified)
• [S300 V3] Firmware version 5
• [S300 V3] Added digital input ethanol content and fuel temperature to datalogging.
• [S300 V3] Increased number of advanced protection inputs from 2 to 4
• Added minimum speed to full throttle shift.
• Fixed digital input unit changing when datalogging.
• Added injector voltage compensation (dead time) quick select.

V2.4.1 (16 June 2015)

• [S300 V3] Firmware version 5
• [S300 V3] Added digital input ethanol content and fuel temperature to datalogging.

V2.4.2 (25 June 2015)

• [s300 V2/s300 V3] Added analog input temperature sensor conversion.

V2.4.3 (15 July 2015)

• Changed protection limit minimum rpm from 2000 to 2500 rpm.
• Changed ECT compensation datalogging to read warm up compensation when cold

V2.4.4 (20 July 2015)

• Added closed loop minimum coolant temperature tables.
• Fixed ECT open loop fuel compensation under certain conditions

The USB driver has been certified by Microsoft so will install on Windows 7 and above without needing confirmation. It also is available in Windows Update.

Download here

hello, how do you set up the flex fuel to datalog the percentage and fuel temp? do you use Analog Zero still on the V3?

Oops, I didn't enable the sensor for ethanol content & fuel temp. I'll make another release shortly.