Page 1 of 1
Gear compensation
Posted: Thu May 07, 2015 2:00 am
by sass
This table allows the ignition timing to be altered by gear. Positive values will advance, negative values will retard. Note that the ignition timing is change for all load and rpm values in each gear.
We have an issue: ignition timing not working for all gears and does not matter which racing maps we use.
Calibration
FG2/FA5, MAP based, Deatschwerks 1000 injector starting calibration
Re: Gear compensation
Posted: Thu May 07, 2015 6:54 am
by Hondata
Please post your calibration and a datalog of the problem.
Re: Gear compensation
Posted: Sat May 09, 2015 1:02 am
by sass
ok
Re: Gear compensation
Posted: Sat May 09, 2015 8:35 am
by Hondata
It is because the knock ignition limit is 60. Setting it to 0 will allow the gear ignition compensation to work.
Re: Gear compensation
Posted: Sun May 10, 2015 8:19 am
by sass
What's next?
Re: Gear compensation
Posted: Mon May 11, 2015 7:46 am
by Hondata
Check
Ignition -> Air Temperature Compensation -> Ignition IAT Applied to Ignition Advance
Re: Gear compensation
Posted: Tue May 12, 2015 4:19 am
by sass
bingo
Re: Gear compensation
Posted: Tue May 12, 2015 7:38 am
by Hondata
Good. I've updated the help file.
Re: Gear compensation
Posted: Tue May 12, 2015 11:22 am
by sass
thanks