3G TL Stage 2 Bisi cam cold idle misfire

Calibrations for FlashPro Manager - Use all calibrations at your own risk (dyno tuning recommended)

Post Reply
jevans06
Posts: 1
Joined: Mon Dec 22, 2014 10:57 pm

3G TL Stage 2 Bisi cam cold idle misfire

Post by jevans06 »

I have a 2006 Acura tl Manual transmission. Mods I have are, 3.7L IM, ZDX TB, 4inch CAI, Ported intake runners, and pocket ported heads.
I recently installed stage 2 cams as well. Ever since then, I have been getting random misfires when the engine is cold at idle. I cannot figure out how to adjust for this.
Any help is appreciated
I have attached a datalog as and my tune as well. Can see the misfires during the idle. These seem to only occur during idle and when the engine is bone cold.
You do not have the required permissions to view the files attached to this post.
Top
User avatar
Spunkster
Site Admin
Posts: 23884
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: 3G TL Stage 2 Bisi cam cold idle misfire

Post by Spunkster »

Has this been properly tuned on the dyno?
Top
Post Reply

Return to “FlashPro Calibrations”