Hondata

Posted: **Tue Sep 23, 2014 7:28 am**

Hi I've had my hondata for about a year now and when I first got it the rev limiter and two step worked(launch control) but I had to deleted map and redo it and ever since then they both don't work. I've already updated s300 from the latest update and also when I go into sensors it shows that it's turned off.

I've also set the rev limiter to 5k and nothing.

My launch control I've set to always on, 4500rpm and second box to 4400rpm and 10 on fuel and 15 on ignition.

And also my cel shift light does not come on when I set low like 7k.
Need help

Thanks in advance

Posted: **Tue Sep 23, 2014 9:19 am**

What is the serial number on the s300 board inside the ECU?

From Help, About, what is the version of software that you are using?

Post your calibration as well as a datalog showing the problem.

Posted: **Sat Oct 18, 2014 7:27 am**

Sorry for the late reply. I really appreciate the help.

The serial number for hondata is 30524.

And the version is 2.3.30

Posted: **Sat Oct 18, 2014 7:35 am**

image.jpg

S300 ecu

image.jpg

Posted: **Sat Oct 18, 2014 7:39 am**

image.jpg

Calibration is from the jdm b18c from hondata.

Posted: **Mon Oct 20, 2014 8:27 am**

Anybody help?

Posted: **Mon Oct 20, 2014 9:30 am**

You still have not posted the calibration or a datalog showing the problem.

Hondata

S300v3 rev limiter, cel shiftlight and 2 step not working???

S300v3 rev limiter, cel shiftlight and 2 step not working???

Re: S300v3 rev limiter, cel shiftlight and 2 step not workin

Re: S300v3 rev limiter, cel shiftlight and 2 step not workin

Re: S300v3 rev limiter, cel shiftlight and 2 step not workin

Re: S300v3 rev limiter, cel shiftlight and 2 step not workin

Re: S300v3 rev limiter, cel shiftlight and 2 step not workin

Re: S300v3 rev limiter, cel shiftlight and 2 step not workin