Hondata

Hi,
I'm from Germany so please excuse my english. I just finished my motor build and just wanted to ask for a map as a basemap for street mapping (no dyno available).
As I live in Germany there a very few people tuning hondas or using hondata.
My specs:
93' Honda Prelude BB1 with H22A2 (similiar to H22A1)
Mahle Gold Series Pistons (compression 9:1)
Eagle H-Beam Rods
RC peak and hold injectors 750cc
Holset Hy35 Turbocharger internal wastegate, 58AR
Custom top-mount header
arp fastener, cometic gasket, stage4 competition clutch
hondata s300 p28 ecu

If you need any further informations please let me know.
Thank you so much.
I apologize for asking for a basemap but I'm new to Hondata and I'm not able to decide which already uploaded Map will work fine with my setup.
Greets from Munich,
Jan

Ah..
I forgot the AEM 320l/h fuel pump,
running on stock fuel pressure and fuel rail
Thanks

this should be a good starting point i dont know what map sensor your using so ill keep it stock and u can change it from there check your a/f ratios and make adjustments

Thanks alot!
This came just in time. I'll have a look at the map and
will start the engine for the first time on tuesday.
Sensor is an hondata 4bar, so I'll change this one.
greets from Germany