Page 1 of 1
What injector opening time for RC 750cc injectors on FN2 S/C
Posted: Sat May 24, 2014 4:17 am
by R-12914
Hi, i have an Rotrex supercharged CTR FN2 with RC 750 CC injectors and how are the parameters for the injector opening time in Hondata Flashpro specifically for this injectors and injectorsize?
Thanks!
Re: What injector opening time for RC 750cc injectors on FN2
Posted: Sat May 24, 2014 6:35 pm
by Hondata
Injector size 750cc
Dead times should be
6.00 8.00 10.00 12.00 16.00
3150 2104 1438 1080 672
Re: What injector opening time for RC 750cc injectors on FN2
Posted: Sat May 24, 2014 11:41 pm
by R-12914
Thanks!
What fuel pressure i must use, what overrun injector restart rpms (cut) and what overrun injector restart rpms (recover) i must use for this injectors (RC 750CC).
Is a retune necessary?
Thanks again!
Re: What injector opening time for RC 750cc injectors on FN2
Posted: Sun May 25, 2014 7:59 am
by Hondata
The settings are for a standard fuel system - if you've converted to a return system then try 50-55 psi, and you may have to chance the overall fueling.
The overrun restart should be ok stock.
Re: What injector opening time for RC 750cc injectors on FN2
Posted: Mon May 26, 2014 12:04 am
by R-12914
Ok, thanks! :)