Page 1 of 1
FLASHPRO Not Detecting VIN Nor ECU
Posted: Wed Apr 16, 2014 6:58 am
by Dondada03
I have on 03 UKDM CL9, i have installed a used 07-08 tsx AT ECU, i have also installed my CAN adapter. However, after installing these i decided to test my flashpro to see if the ECU would be detected. The flashpro recognized everything except the ECU. Is this because i have not inserted my VIN into the ECU nor have i had my immobilizer paired with the ECU? or should the flashpro recognize the ECU regardless of this? Please provide me with some feedback as i wish to have this issue rectified.
Re: FLASHPRO Not Detecting VIN Nor ECU
Posted: Wed Apr 16, 2014 8:25 am
by Hondata
It is the CAN wiring. Double check everything.
Re: FLASHPRO Not Detecting VIN Nor ECU
Posted: Tue Apr 22, 2014 10:50 am
by Dondada03
i re pinned the wires, and the ecu was still undetected, however the binary for the ECU was detected where a green tick was displayed. every other subsection under the ecu tab had the I icon. can you provide some further feedback
Re: FLASHPRO Not Detecting VIN Nor ECU
Posted: Tue Apr 22, 2014 11:40 am
by Hondata
What binary was the FlashPro detecting? It might be easier if you send the support information from the help menu.
Re: FLASHPRO Not Detecting VIN Nor ECU
Posted: Tue Apr 22, 2014 12:16 pm
by Dondada03
it detected US 07-08 TSX AT ECU
Re: FLASHPRO Not Detecting VIN Nor ECU
Posted: Tue Apr 22, 2014 3:01 pm
by Hondata
The flashpro recognized everything except the ECU
it detected US 07-08 TSX AT ECU
Which one? Send the support information please.
Re: FLASHPRO Not Detecting VIN Nor ECU
Posted: Mon Apr 28, 2014 10:46 am
by Dondada03
ive attached the screen shot
Re: FLASHPRO Not Detecting VIN Nor ECU
Posted: Mon Apr 28, 2014 10:50 am
by Dondada03
data from flashpro
Re: FLASHPRO Not Detecting VIN Nor ECU
Posted: Mon Apr 28, 2014 11:07 am
by Hondata
Hondata wrote:Send the support information please.
Re: FLASHPRO Not Detecting VIN Nor ECU
Posted: Mon Apr 28, 2014 12:32 pm
by Dondada03
support information such as? i am not certain of what information ur askng
Re: FLASHPRO Not Detecting VIN Nor ECU
Posted: Mon Apr 28, 2014 1:02 pm
by Hondata
From the help menu, with the FlashPro plugged into the vehicle and the ignition on, select 'Send Support Information to Hondata'.
Re: FLASHPRO Not Detecting VIN Nor ECU
Posted: Tue Apr 29, 2014 11:38 am
by Dondada03
i sent the support information about an hour ago
Re: FLASHPRO Not Detecting VIN Nor ECU
Posted: Tue Apr 29, 2014 1:19 pm
by Hondata
It is not detecting the ECU. This is either the ECU itself or the CAN wiring.
Re: FLASHPRO Not Detecting VIN Nor ECU
Posted: Fri May 02, 2014 3:55 am
by Dondada03
Problem solves ECU is now Detected. One the Wires was not all the way in in the DLC connector.
Re: FLASHPRO Not Detecting VIN Nor ECU
Posted: Fri May 02, 2014 7:50 am
by Hondata
Good.