Page 1 of 1

distributor

Posted: Tue Apr 15, 2014 12:46 pm
by freezingmoon
so with the cpr kit installed does the ignitor in the distributor still effect the ignition???

Re: distributor

Posted: Tue Apr 15, 2014 1:03 pm
by Spunkster
No it does not.

Re: distributor

Posted: Tue Apr 15, 2014 1:41 pm
by freezingmoon
thanks, im having a really weird ignition issue that im trying to diagnose...its something that ive never experienced before and very difficult to describe other than a very random and sudden loss of power at any weher in the rpm range, almost feeling like a brief stall... no codes are thrown... been chasing my tail with it for a couple months now...

Re: distributor

Posted: Tue Apr 15, 2014 1:47 pm
by freezingmoon
any help would be GREATLY appreciated!!!
everything on this set up is brand new... no corners cut at all on the build, just cant figure out this weird glitch that i can only assume is ignition related...
thanks!

Re: distributor

Posted: Tue Apr 15, 2014 1:59 pm
by Spunkster
Without the calibration and a datalog showing the problem it is impossible to speculate on what the issue is.

Re: distributor

Posted: Tue Apr 15, 2014 2:04 pm
by freezingmoon
so if a make a datalog can i post it here and maybe u can help? how long of a log should i record? difficult thing is that the occurence is so random its not easy to know when it will happen, its very frustrating to say the least... thanks again for at least corresponding, much appreciated!

Re: distributor

Posted: Tue Apr 15, 2014 2:20 pm
by Spunkster
YOu must record the problem. You can always trim the datalog and just upload the section where the problem occurs.

Re: distributor

Posted: Tue Apr 15, 2014 2:30 pm
by freezingmoon
ok thanks, i will record and post on here in a day or two... thanks so much!