closed loop
Posted: Thu Dec 26, 2013 9:44 pm
PLEASE!!!!!!!lol
so the s200 and the s300 both support external wideband Closed loop
but Kpro doesn't.....my tuner was even SURPRISED
I'm running boost on the street....I would really like closed loop.....I know the stock sensor car......but I don't like it!
I have seen a few inconsistient with the stock o2's.....most read down to 11.5...some 11.7or 11.9....even brand new
I have ver3 kpro.....right now I have my PLX wideband wired DIGITAL to the kpro.......works great for datalogging
but no closed loop
PLEASE BRING THIS FEATURE BACK
only issue I would see is putting a delay on the reading of the external wideband...takes like 10seconds for my PLX to boot up..and a few minutes for it to read correctly when it's cold start...most o2's r like that thou
PS.....thx for the PRESET on the kpro for the digital input....all I had to do was make a adapter cable...then plug and play
cable was......... 3.5mm jack to 4 pin header.... PLX to Kpro ...set it up on channel 0
so the s200 and the s300 both support external wideband Closed loop
but Kpro doesn't.....my tuner was even SURPRISED
I'm running boost on the street....I would really like closed loop.....I know the stock sensor car......but I don't like it!
I have seen a few inconsistient with the stock o2's.....most read down to 11.5...some 11.7or 11.9....even brand new
I have ver3 kpro.....right now I have my PLX wideband wired DIGITAL to the kpro.......works great for datalogging
but no closed loop
PLEASE BRING THIS FEATURE BACK
only issue I would see is putting a delay on the reading of the external wideband...takes like 10seconds for my PLX to boot up..and a few minutes for it to read correctly when it's cold start...most o2's r like that thou
PS.....thx for the PRESET on the kpro for the digital input....all I had to do was make a adapter cable...then plug and play
cable was......... 3.5mm jack to 4 pin header.... PLX to Kpro ...set it up on channel 0