Page 1 of 1

knock sensor circuit malfunction p0325

Posted: Sun Dec 15, 2013 8:21 pm
by justinwgt
- what vehicle you have
1992 honda civic hatch

- serial number of your K-Pro
2068-301135

- ECU part number (starts with 37820) and serial number (the number under the part number)
37820-PRB-A04

- KManager version (not 'the latest')
3.2.5.0

- the calibration (as an attachment)
tsx stock calibration in k manager
only adjustment was in fuel low speed, row 1, 2, and 3 moved closer together for better throttle response (still need work)

- a datalog of a problem (as an attachment)
this datalog was a drive from my friends house to mine to catch the error code since it turns on only when driving
sorry for big file
occurs between 10:30 10:35

- anything about the car which has been modified from stock which may affect the ECU (don't include what sort of rims you have nor stereo etc).
engine/tranny 2004 k24a2 completely stock
engine harness brand new 2004 rsx s
knock sensor 2004 rsx s
hasnt been tuned. (maybe thats the problem?)
not sure what else is relevant, let me know if you need more information

- when and where you got the K-Pro
ktuned.com about 4-6 months ago

- a specific description of the problem
occurs driving, no noticeable difference in driving.
worried about motors health

Re: knock sensor circuit malfunction p0325

Posted: Mon Dec 16, 2013 11:10 am
by Spunkster
What is the serial number that is on the K-Pro baord inside the ECU?

Have you followed the troubleshooting steps in the Helm's Manual for this error code?