Hondata

So as the title states I just reinstalled a resistor box after switching back to low ohm injectors and I cant get them to fire with the resistor boxes (tried about 8) plugged in. When I had used the high ohm injectors my tuner had cut out the resistor box and wired the five wires together. I can only get them to fire this way for testing. Am I missing something? I changed the injector size in smanager and dead pulse. Is there anything else I should be changing? I dont have the car in front of me to get the serial number of the s300 but ill try and provide as much info as possible. Attached my calibration

This sounds like a wiring issue. Check everything that you have done.

http://www.hondata.com/techinjectorwiring.html

Thing is I didnt do much but reinstall the resistor box. I can get them firing with the wires tied together as demonstrated in second picture but when I plug in the box nothing happens. When I initially had switched to high ohm injectors my tuner had cut the box out and wired the 5 wires. Im assuming all I had to do was plug in a resistor box right or was there something else I had to do? Damn the pictures are huge sorry