Hondata

First of all sorry for my bad english
When i look at my datalog isee that my psi is negative.
somthing like -2.1 up to -2.9.
i have civic EP3 type R. with hondata + injen Cai + Headres + finel drive.
Some guy told me that the psi is depend on barometric pressure and i cant do anything about it.
if some 1 have any ideas that will help me. i will like to hear.
ill add file that i pull 3'rd gear.
and picture of my car!

Thanks in advance.

What do you have set in Options, Settings, Units?

I just bought it so i dont know exactly what i have on my car.
but he gave me 2 maps to use.
1 map for daily ride.
the other one is much more aggressive.
ill post the maps here and look at them if u have somthing too improove.


Thanks in advance.

You have not answered the question about the settings

omriatoon wrote:I just bought it so i dont know exactly what i have on my car.
but he gave me 2 maps to use.
1 map for daily ride.
the other one is much more aggressive.
ill post the maps here and look at them if u have somthing too improove.


Thanks in advance.

He is asking about the settings on your kpro manager, what unit of measurement is your Kpro manager reading in?

vacum unit = inch
vacum unit base = absolute
pressure unit = psi
pressure unit base = absolute (full vacum)

my friend told me to change it. the pressure unit base was on atmospheric.
it didnt change nothing.

Inch must be set to Absolute

PSI must be set to Atmospheric

So ill change it back to atmospheric.
Any more ideas?

Sorry for double.
Guys i need more ideas pls.
I realy dont know what to do.

Thanks in advance.

Download the most recent beta version of software, then upload your calibration using that new version. Then datalog and seeif that works better. The datalog you have posted shows no data.