Hondata

I have a six speed 2007 TSX with an Injen CAI, Hondata IMG, and a Hytech style race header. I plan to install a 45° VTC wheel in the future, but in the meantime would like to install a Hondata calibration. I don't plan to do any dyno tuning until the 45° VTC wheel is installed. Is the "tsx-07-2-tuned" appropriate for the modifications I have currently installed? I am concerned about running lean.

Thanks,
-Jason

You will need to datalog and look at the readings to ensure you are not running lean or getting detonation.