Hondata

Worked fine for 2 years, no changes made, now I can't connect to laptop. Device manager shows kpro as unknown device. It is throwing a cel. I used the paper clip method the read cel, it is 38. No listing for 38 code, must be garbage code? Ecu still starts car. No red or green light is on. Tried another laptop, got the same results.

KPRO Serial Number 05009049
ECU Part Number 37820-PRB-A06
ECU Serial Number 2068-607524

Installed on a 03 rsx type S
KManager version 3.2.5
K-pro installed by Hondata about 2 years ago.

It could be a damaged ECU, K-Pro or both.

Send an email to support <at> hondata.com with the following and I will issue an RMA and give you further
instructions (include a link to this thread):

Name:
Address:
Phone:
Email:
Serial#:
Description of problem: