Page 1 of 1
timing table maybe?
Posted: Thu Aug 22, 2013 8:44 pm
by da1hardee
I'm working with a B18C1 block, JE 11.5:1 pistons. B16 head, JUN 3 cams, AEBS intake, 65mm throttle body, header, AEM fuel rail, walbro 255 and RC 310 injectors. When I change the injector size to 310 the car stalls out and dies. Thanks in advance.
Re: timing table maybe?
Posted: Sun Aug 25, 2013 7:16 am
by 02busa1
Are you changing the injector size while the car is running? If so, change the size - upload - then start the car. Also you should have a sheet that came with the injectors to set the dead times.
Re: timing table maybe?
Posted: Sun Aug 25, 2013 6:01 pm
by da1hardee
i changed the injectors to the dead time they supposed to be....the car leans out and dies.
Re: timing table maybe?
Posted: Mon Aug 26, 2013 10:29 am
by Spunkster
The dead times you are using may be wrong.
Re: timing table maybe?
Posted: Mon Aug 26, 2013 10:33 am
by da1hardee
Ok I'll have to contact RC to get the dead times.