Page 1 of 1
Civic Type R 7PSI program
Posted: Thu Jul 29, 2004 6:43 am
by menfou
Hello,
I just receive my K-PRO card.
I have a Civic Type R Europe with :
-JRSC 3.4" pulley.
-Injen CAI.
-3" Exhaust.
-JacksonRacing Header.
-RC 550cc Injectors.
I would like to know if It's possible to have
wdsonny 7PSI program on my Euro K-PRO ?
What program I need for 7PSI on Euro Civic Type R ?
Posted: Thu Jul 29, 2004 9:52 am
by Spunkster
You will need to use the K20a2-civictyper-jrsc-550cc.kal. This is for 5 psi, and you will then have to tune the car for the additional boost that you will be running on the dyno.
Posted: Fri Jul 30, 2004 12:15 am
by menfou
Doug say me don't use the 5PSI program on your 3.4" pulley.
I try to accelerate with 5PSI program and I have misfire
I used the
k20a2-rsx-550-jrsc-9psi program to make a
PRA-Euro-Civic-TypeR-jrsc-550-7psi , and I have the same problem.
Datalog:
Engine dont run,stop:
http://k20a.free.fr/file/EngineStop.kdl
Engine idle:
http://k20a.free.fr/file/idle.kdl
Engine in 3rd:
http://k20a.free.fr/file/3rd.kld
My 7PSI program for k20a2 Civic Type R Engine:
http://k20a.free.fr/file/k20a2-civictyp ... c-7PSI.kal
Posted: Fri Jul 30, 2004 2:12 am
by menfou
My A/F is 12.6 until 6000rpm after I have 12.8.
Posted: Fri Jul 30, 2004 9:11 am
by menfou
I resolved the problem between 6000 and 7100rpm, after 7200rpm I always have knock.
I put more fuel (until 95% DUTY) and I put 20?,19?,18?,17?,16?,15? for ignition and I have knock.
To remove knock the solution is reduce advance ignition and to put more fuel,no ??
Posted: Wed Aug 18, 2004 12:50 am
by menfou
I have 10 knocks in 3rd when I do 2000-8500rpm, and the first knock is always at 7200rpm.
I put the K20a2-civictyper-jrsc-550cc.kal, and I put for fuel +5,+10,+20,+25% everywhere.
I have the same problem
I put -0.5, -1, -1.5, -2.5, -3, -3.5, and -4? for the ignition and I have always 10 knocks.
CPL-Racing in UK find the solution, but I don't know when he sends me the solution, and I don't know the price
If you want I can do a datalog for each program ( 11 program) and post them here.
Posted: Wed Aug 18, 2004 5:41 am
by menfou
I did 7 datalogs this day:
The first is with the original program
k20a2-civictyper-jrsc-550cc
http://k20a.free.fr/file/k20a2-civictyp ... -550cc.rar
I have hesitation after 6000rpm and knocks after 7000rpm
The second is with +10% for fuel and -0.5? for ignition
http://k20a.free.fr/file/essai1.rar
I have hesitation after 6000rpm and knocks after 7000rpm
The 3rd is with +10% for fuel and -1? for ignition
http://k20a.free.fr/file/essai2.rar
I have hesitation after 6000rpm and knocks after 7000rpm
The 4th with +10% for fuel and -1.5? for ignition
http://k20a.free.fr/file/essai3.rar
I have hesitation after 6000rpm and knocks after 7000rpm
The 5th with +20% for fuel and -2? for ignition
http://k20a.free.fr/file/essai4.rar
I have hesitation after 6400rpm and knocks after 7000rpm
the 6th with +20% for fuel and -2.5? for ignition
http://k20a.free.fr/file/essai5.rar
I have hesitation after 6400rpm and knocks after 7000rpm
The 7th with +20% for fuel and -3? for ignition
http://k20a.free.fr/file/essai6.rar
I have hesitation after 6400rpm and knocks after 7000rpm