Hondata

Posted: **Sat Jun 01, 2013 11:33 am**

Hey!

Tuned my car last weekend and i was supprised when the AEM wideband showed 10.5 and the datalog wouldn't go lower then 12.1 AF.
The offset is set perfect in the car, AEM shows 14.7 and datalog shows 14.7.

Also, i wonder why the ecu wont go from closed loop to open loop?

The wideband is hooked up to ELD (D10).

Any ideas how to set this right?

Posted: **Mon Jun 03, 2013 9:40 am**

Have you removed the resistors as it says in the help file? http://www.hondata.com/help/smanager/wi ... ghtsub=d10

Posted: **Mon Jun 03, 2013 10:15 pm**

Spunkster wrote:Have you removed the resistors as it says in the help file? http://www.hondata.com/help/smanager/wi ... ghtsub=d10

Dont have a US ECU. Got a european P30.

Posted: **Wed Jun 12, 2013 1:26 pm**

What wideband are you using?

Posted: **Sun Jun 23, 2013 9:46 am**

Posted: **Mon Jun 24, 2013 10:18 am**

IT may be a european ECU, but you must still remove the resistors.

Hondata

Datalog wont go lower then 12.1 AF

Datalog wont go lower then 12.1 AF

Re: Datalog wont go lower then 12.1 AF

Re: Datalog wont go lower then 12.1 AF

Re: Datalog wont go lower then 12.1 AF

Re: Datalog wont go lower then 12.1 AF

Re: Datalog wont go lower then 12.1 AF