Page 1 of 1
Speedo not showing above 180kph
Posted: Mon Apr 22, 2013 4:19 pm
by chneo1982
08 Asia S2000.
Speed cut set at 300kph, but speedo still stuck at 180kph max.
Please advise.
Re: Speedo not showing above 180kph
Posted: Mon Apr 22, 2013 4:38 pm
by Spunkster
FlashPro serial#:
Version of software used:
Post the calibration used as well as a datalog showing the issue.
Re: Speedo not showing above 180kph
Posted: Tue Apr 23, 2013 7:10 am
by chneo1982
FlashPro serial#: FP-S2K-INT-40189
Version of software used: 1.4.7 (have yet to try 1.5.1)
Vehicle speed continues to increase after 180kph, but speedo get stuck at 180kph.
Re: Speedo not showing above 180kph
Posted: Tue Apr 23, 2013 9:38 am
by Spunkster
Start by downloading the most recent beta version of software, upload your calibraito to the ECU using that version and see if that resolvees the issue.
Re: Speedo not showing above 180kph
Posted: Tue May 14, 2013 7:05 pm
by chneo1982
Have tried with 1.5.1.
Speedo still can't show over 180kph.
Re: Speedo not showing above 180kph
Posted: Wed May 15, 2013 10:28 am
by Spunkster
You still have not provided the calibration or a datalog for us to look at.
If you return the ECU to stock, does it do the same thing?
Re: Speedo not showing above 180kph
Posted: Thu May 16, 2013 12:38 am
by chneo1982
I didn't do a datalog. Only looked at the cluster meter physically. It's maxed out at 180kph, but speed in reality can still increase.
If return to stock for JDM cars speed cut is at 180kph. So it will never show above 180kph.
Re: Speedo not showing above 180kph
Posted: Thu May 16, 2013 7:49 am
by Hondata
We believe that the dash does not show over 180kph.
Re: Speedo not showing above 180kph
Posted: Thu May 16, 2013 4:20 pm
by chneo1982
That sucks.....