Page 1 of 1
need a map 83mm gsr turbo
Posted: Thu Mar 07, 2013 9:17 pm
by TeGgYBwOi
edlebrock mani
9:5.1 cr pistons
ferrea valves
supertech valve springs n retainers
450cc dsm injectors
manley h beam rods
t3/t4 turbo 50trim
walbro 255 fuel pump
3"piping
need a map to get my car running...im new to this i can use any help n is appreciated in advanced...
Re: need a map 83mm gsr turbo
Posted: Sat Mar 09, 2013 11:10 pm
by hpmx18
start with p72 map enter injector size and add about 20% fuel on low cam map and add 180% for boost compensation and retard 2* per lbs of boost for saftey and you should be able to idle and adjust from there if you have a wideband itll b alot more easier
Re: need a map 83mm gsr turbo
Posted: Sun Mar 10, 2013 1:00 am
by TeGgYBwOi
hpmx18 wrote:start with p72 map enter injector size and add about 20% fuel on low cam map and add 180% for boost compensation and retard 2* per lbs of boost for saftey and you should be able to idle and adjust from there if you have a wideband itll b alot more easier
no wideband as of yet....how would i start the p72 map?
Re: need a map 83mm gsr turbo
Posted: Sun Mar 10, 2013 1:24 am
by TeGgYBwOi
hpmx18 wrote:start with p72 map enter injector size and add about 20% fuel on low cam map and add 180% for boost compensation and retard 2* per lbs of boost for saftey and you should be able to idle and adjust from there if you have a wideband itll b alot more easier
if its not much to ask would you be able to set that map up for me?
Re: need a map 83mm gsr turbo
Posted: Sun Mar 10, 2013 4:02 pm
by hpmx18
shoot me a message on my fb so i can remember
Re: need a map 83mm gsr turbo
Posted: Sun Mar 10, 2013 8:03 pm
by TeGgYBwOi
hpmx18 wrote:shoot me a message on my fb so i can remember
message sent