Page 1 of 1
need calibration for a high compression h23 vtec
Posted: Thu Feb 28, 2013 8:26 pm
by mikey76133
i have a h23 vtec with 880cc injector, 240 compression need base map thx
Re: need calibration for a high compression h23 vtec
Posted: Sat Mar 02, 2013 10:04 pm
by hpmx18
mikey76133 wrote:i have a h23 vtec with 880cc injector, 240 compression need base map thx
start with h22map and add about 25% fuel and get car to idle about 1000-1300 depending on your compression if you have a wideband it'll be much easier
Re: need calibration for a high compression h23 vtec
Posted: Sun Mar 10, 2013 12:28 am
by mikey76133
having problem setting up in injector, i have 880cc injector but i put 550cc and everything running rich like crazy can u check out my map thx.
Re: need calibration for a high compression h23 vtec
Posted: Sun Mar 10, 2013 4:03 pm
by hpmx18
if you have 880 you need to put 880 not 550
Re: need calibration for a high compression h23 vtec
Posted: Sun Mar 10, 2013 9:18 pm
by mikey76133
I put it on 880 but the engine keeps on stalling out.
Re: need calibration for a high compression h23 vtec
Posted: Tue Mar 12, 2013 11:04 pm
by mikey76133
ok i look at my injectors 3 of them are precision 6280 injectors and one says precision 6290 injectors. anybody knows what kind of injectors are these, and the seller i got them from said these were 880cc.
Re: need calibration for a high compression h23 vtec
Posted: Wed Mar 13, 2013 4:25 pm
by mikey76133
ok, just got it dyno jet tune h23 vtec making 200 hp with 160tq. anybody can look at the map and give me anything i should change thx.