Page 1 of 1

84mm Gsr 2000cc E85 Walbro 400lph

Posted: Tue Feb 19, 2013 1:09 pm
by Harry-DC
Anyone can help with a basemap or tune
Gsr sleeved 84mm
Gsr stroke 9:2.1 JE
B16 head with Skunk2 tuner 1 cams
Edlebrock victor X
68mm TB
Pte 2000cc injectors with Aem driver
Walbro 400lph
Hondata 4 bar
15lbs boost
Gt35 Garrett .63 hotside
LS tranny
Quife LSD
Spec twin disc
S300 on po6
msv wastegate
50mm bov
Ngk #8 plugs gaped at .019
Afi style ram horn
also stock fuel psi
And and.stock ignition
AEM tru boost
AEM wideband
3" exhaust
Any help would be appreciated

Re: 84mm Gsr 2000cc E85 Walbro 400lph

Posted: Tue Feb 26, 2013 12:12 am
by hpmx18
were the cams degree-in and i would gap the plugs to #10 instead of 19 mite have breakup in higher rpm
the injectors are big mite have to check with pte for the latency values to have a stead smooth idle
other then that i would start with jdm b18c map and tweak till you get the car idle smooth with out shutting off