K-Pro Analog inputs don't read UEGO
Posted: Sat Jan 19, 2013 12:08 pm
Tuning a customer, they have their UEGO connected to one of the analog inputs on his K-Pro V3. No voltage/airfuel is being reported.
I thought it could be that the user just had it on the wrong analog input, but I set all analog inputs for the 30-4100 wideband to see. All inputs report .68V.
He states that his gauge is reading fine. Customer has +12v power from steering column, and grounded behind the glovebox. UEGO white signal wire is soldered to Analog 1 input.
Attached is the datalog.
EDIT: User will be posting pictures of their installation of the gauge and wires soon.
I thought it could be that the user just had it on the wrong analog input, but I set all analog inputs for the 30-4100 wideband to see. All inputs report .68V.
He states that his gauge is reading fine. Customer has +12v power from steering column, and grounded behind the glovebox. UEGO white signal wire is soldered to Analog 1 input.
Attached is the datalog.
EDIT: User will be posting pictures of their installation of the gauge and wires soon.