K-Pro Analog inputs don't read UEGO

[magnEsium]

Tuning a customer, they have their UEGO connected to one of the analog inputs on his K-Pro V3. No voltage/airfuel is being reported.

I thought it could be that the user just had it on the wrong analog input, but I set all analog inputs for the 30-4100 wideband to see. All inputs report .68V.

He states that his gauge is reading fine. Customer has +12v power from steering column, and grounded behind the glovebox. UEGO white signal wire is soldered to Analog 1 input.

Attached is the datalog.


EDIT: User will be posting pictures of their installation of the gauge and wires soon.

[Jrandall13]

Here's the pictures of the installation and the uego gauge reading.

[magnEsium]

Disregard this thread, user has fixed the issue. Harness was upside down.