h23a1 non-vtec basemaps and more needed

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
Post Reply
aceman187443
Posts: 59
Joined: Sun Dec 30, 2012 6:25 am

h23a1 non-vtec basemaps and more needed

Post by aceman187443 »

i need a base-map or any maps for the h23a1. please post any maps for the h23 here. i will be posting my tuned map as soon as it has been at the dyno. i need a base-map to tweak to get me a few miles to the dyno. a stock base-map i can get this car running with a few changes.

This is what i have now:
piggybacked walbro 255 pump (55psi @ rail right now)
aem high flow rail
1000cc id injectors
dc headers
3" pipe




i will be installing a t3/t4 turbonetics turbo and intercooler setup very soon. i will post all maps for others when i have them set good enough for others to start-up at least.

this is the maps i will be posting in the future. a map for this setup above, a map for this setup+ a t3/t4 turbo, and a non altered base-map if i can get one dug up. i will include any other maps that maybe usefull also. thanks everyone

please help me get this started!
Post Reply