Hondata

- serial number of your FlashPro : FP-CRZ-INT-80049
- FlashPro Manager version (not 'the latest') 1.3.7.0
- the calibration (as an attachment) => provided EU-CRZ stock equivalent not modified
- a datalog of a problem (as an attachment) =>
- what sort of vehicle you have => European CR-Z
- what sort of ECU you are using => stock ECU
- anything about the car which has been modified from stock which may affect the ECU (don't include what sort of rims you have nor stereo etc).

=> engine related bolt on list :
HKS RSR intake (red 2 layer wet filter element)
Spoon Throttle Body
T1R exhaust
Spoon muffler
GE8 intake manifold plenum
motul 0w20 300v racing oil / mugen oil filter element

- a specific description of the problem

I did my first datalog in order to start calibrate the AFM sensor, from graph view, i decided to increase AFM flow numbers by 6%

i clicked on mass flow (g/s) row header button in order to select all row
i go to Edit menu, select Adjust
boom! - Abnormal program termination


computer is : Toshiba Satellite C660D-1C6
windows 7 Home Prem.

edit : i am not a windows guy, this PC has nothing else installed than Flash Pro managed and needed stuff.

the Edit menu commands are making the crash,

however by right clicking on the selected items to adjust values works !

Start by downloading the most recent Beta version of software and see if that resolves the problem.

Thanks I will try that.

Thanks for the report - the problem is still there in 1.4.2; I will fix very shortly.