Hondata

I've been having issue with vtec when hitting boost. low vtec set at 4700 rpm hight at 7500 rpm. when i hit full boost at 10 ibs there's a couple second delay before the wastegate will open up. during that couple sec delay the car feels like its' bogging down. then when the gate opens, it accelerate just fine.

I've tried different vtec setting and still does same thing. if i leave low and high vtec the same then car ran just fine. gate opens normally and no delay.

what's your vtec setting, or no vtec at all on boosted car. does vtec hepl/make a difference at all as far as power/hp?

thanks