Page 1 of 1

Im havin a problem.....need help?

Posted: Sun Jun 20, 2004 8:16 am
by Matt02222222
I Have an 02 civic si with the revhard kit, and i uploaded the flash for the 12ohm revhard kit, and my car wont start, but when I upload the factory flash it starts right up. The only thing is im not sure if my injectors are 440s if they werent 440s should the car still start. It's turning over but my installer said its not getting enough fuel.

Posted: Mon Jun 21, 2004 8:33 am
by Hondata
It's strange that one calibration works and one doesn't. Try disabling the immoblizer (in the parameters window under misc) and see if that works.

The injectors should be labeled SL4-440 or SL9-440 if they are 440cc.