Page 1 of 1
Starting car for first time, but won't start
Posted: Mon Jun 07, 2004 10:03 am
by dawson
My car will not start..., it cranks over and trys to start but won't. My O2 sensor is not hookup to my exhaust, and i have 450 dsm injectors. i hear all this stuff about the injectors, and am guessing this is the problem. I am wondering how out there is running with the dsm injectors and what problems they have
Posted: Tue Jun 08, 2004 5:40 pm
by dawson
alirght i blieve it is becuase of my injectors. I read the post about the dsm 450's (which i am running) has anyone ever experienced this problem?
Posted: Wed Jun 09, 2004 6:16 am
by DaX
Remember to keep it simple. A car only needs four things to run [really 5 if you count timing].
Spark - Make sure you are getting a good spark on all of your cylinders. I throw timing under this, because it's spark related, but also make sure your mechanical and electrical timing are set correctly.
Fuel - Make sure you are getting fuel. Check to see if the fuel pump is running. Make sure your injectors are firing.
Compression - Is this a new build? Do you think you may have washed the cylinders?
Air - This is usually never the problem, but make sure there is nothing blocking the intake tract.
Posted: Tue Jun 29, 2004 4:40 pm
by Boofster
You need a basemap. Contact your Hondata dealer or tuner.