Page 1 of 1
b16a2 with S100
Posted: Tue May 25, 2004 11:18 am
by 00EM1Si
Im planning to get hondata S100 on my 2000 Civic Si b16a2 and Im a little confused... Is the S100 A chip that is installed in my stock ECU? I believe I have OBD2...Do I need to convert to OBD1??? let me know thanks
Posted: Tue May 25, 2004 2:00 pm
by DaX
You need to convert to OBD-1. S100 and S200 are both interface boxes that attach to your stock ECU. There is a ROM chip installed inside the ECU also.
Posted: Tue Jun 01, 2004 12:15 pm
by turbosi92
DaX wrote:You need to convert to OBD-1. S100 and S200 are both interface boxes that attach to your stock ECU. There is a ROM chip installed inside the ECU also.
Only the S200 has an interface box. The S100 is all within the ECU. An OBD1 conversion is mandatory as stated above.