General Question: Chk Light Turn On, On Start Up
Posted: Sun Nov 11, 2012 10:51 am
General question: i started my car today and the chk eng light came on, after i reached home i used the kmanager to find out what the code was and its states:
"Daughter board communication error (barrery vol. . . " didnt see anything pass this.
datalist shows my battery voltage at 13.7v at idle, car starts great never had a problem with my KPro III.
i cleared the code and the light is out now but wanted to know if i have a bigger problem soon to happen.
Serial No:11289
ECU No: 37820-PRA-E02
KMan: 3.2.0.0
Vehicle: 2005 EP3 UKDM
Modified: nothing electrically
Its a genuine kpro III i got July 2012 via a dealer in P.Rico.
"Daughter board communication error (barrery vol. . . " didnt see anything pass this.
datalist shows my battery voltage at 13.7v at idle, car starts great never had a problem with my KPro III.
i cleared the code and the light is out now but wanted to know if i have a bigger problem soon to happen.
Serial No:11289
ECU No: 37820-PRA-E02
KMan: 3.2.0.0
Vehicle: 2005 EP3 UKDM
Modified: nothing electrically
Its a genuine kpro III i got July 2012 via a dealer in P.Rico.