Hondata

When will we get an option for fuel vs ignition cut for rev limiters?

There are no plans to add this feature. Ignition only rev limits have no advantages over fuel, and significant disadvantages.

Could you elaborate at all? or point me to a link with information?

Cutting ignition will flood the engine with unburnt fuel, which then washes the oil from the bores very quickly and add heat to the exhaust system.

Another missing feature that is apparently in Flashpro.

Can we get something that will disable LTFT?

Do not assume that because a feature is available in a different system that it is possible to implement for KPro.

I am not, I was just asking if it was available.

Is that a no??