Page 1 of 1
K24/K20 Map
Posted: Tue Aug 28, 2012 7:30 pm
by its_ish
Hi, I need a map for the below set up so that I can drive the car to the tuners.
K24 block with 12:5 CP Pistons and standard rods
K20 head with Spoon cams and OBX Valves and retainers
DC5 K20 Type R injectors
T1R Exhaust Manifold
2.5" Exhaust system
RBC manifols
Spoon 70mm throttle body
Please email me at
israel@jaycar.com.au
Thanks!
Re: K24/K20 Map
Posted: Thu Aug 30, 2012 5:06 am
by its_ish
whats the turnaround time on map request in this forum?
Re: K24/K20 Map
Posted: Thu Aug 30, 2012 3:17 pm
by Spunkster
Re: K24/K20 Map
Posted: Thu Aug 30, 2012 4:38 pm
by its_ish
I have and read the post and am back here...
There are no K24/K20 base maps available in the KManager that is close to my requirements.
I would've thought that Hondata would have hundreds, if not thousands of calibrations
from your database of tuners from around the world that is close to my engine set up
specifications.
Re: K24/K20 Map
Posted: Sat Sep 01, 2012 1:46 pm
by 05typeR
Hi mate,
Since you only need to get by your tuner(s) I would suggest adding about 5-10% more fuel and decreasing the ign a few degrees on a map for your car/motor
.
if you have flash mil with knock enable and a AFR gauge keep looking at these.
Re: K24/K20 Map
Posted: Thu Sep 20, 2012 3:56 am
by tomzauto
i can def help you out, check out my site
tomzautotuning.com or email
tomzauto@yahoo.com