Hondata

hey guys,

i'm new to hondata. but i'v been using crome for years,

i need some help with the correct "order\procedure" of making a new map in hondata,


this is what i used to do in crome:
chk sum + rtp
p28 to p30
options
boost tools
boost table wizard
fuel tools
inj size/type
offset
set ignition with timing light.


when you start a new non boosted too booster map with hondata, is there an order to do the procedure?

a few days ago i tryed my s300 unit on a friends car,
and thats what i'v done:
new stock p28
in paramters:
set to open loop, rev limits. vtec. etc.
misc:
disable ks, disable eld, dis inj error, dis barometric sensor,
MAP: set to replacemant 3 bar.
fuel trim:
changed current injector size to 850, and set the offset table to my inj manufacturer specs, (i left the overall fuel trim at 0%, is that ok?)
SET TPS %0-100
lock timing and adjust with timing light,

when do i need to enlarge the map to a 3 bar? also, when do i need to apply the create boost table feature??

please let me know if i'm skipping anything or doing anything wrong?



thanks!

The order does not matter as long as you do it before you start tuning.