B16A2 stroker turbo with meth/inj.

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
Post Reply
Wolli
Posts: 104
Joined: Fri Jul 14, 2006 11:49 am

B16A2 stroker turbo with meth/inj.

Post by Wolli »

B16A2 darton sleeved block
83mm je 9:1 pistons
crower stroker with 89mm crank and rods
fully built head
crower cams turbo stage 2
edelbrock victorx manifold
garrett gt3076r
3" exhaust 2 1/2 " piping
70mm bdl throttle body
crane cams hi6 with lx-92 coil
alcohol inj.
rc 750 inj.
manual mfactory race tranny

it is tuned up to 14 psi of boost by now. fuel pressure @ 3.3 bar
You do not have the required permissions to view the files attached to this post.
Wolli
Posts: 104
Joined: Fri Jul 14, 2006 11:49 am

Re: B16A2 stroker turbo with meth/inj.

Post by Wolli »

now tuned to 20 psi, boost by gear and low/high boost switched with the scs. aux 2 is used for fan control!

almost forgotten: tuned with premium fuel!!
You do not have the required permissions to view the files attached to this post.
Post Reply