Page 1 of 1
having problems after seeting base map
Posted: Fri Mar 16, 2012 10:11 am
by ategrab20
Yea check it. i have a b20 with gsr head so its vtec. i put a base tune of b20 stock. it has vtec so i turned on vtec. im not really sure how the numbers actually work within the vtec deal. i set the base n started her up. (A) it doesnt upload what i have changed (B) when i have it in place n everything. only in first gear between 2000 n 2500 rpm i get this really bad dead spot or something. i have my stock ecu. its a p72 0bd2. it runs fine, but when i hook up my hondata ecu. it really hesitates big time only in first. Anyone know whats up with that?
Re: having problems after seeting base map
Posted: Fri Mar 16, 2012 10:54 am
by Spunkster
What happens when you try to upload the calibration?
Re: having problems after seeting base map
Posted: Fri Mar 16, 2012 8:22 pm
by ategrab20
A box would pop up saying "cant upload try uploading again".
Re: having problems after seeting base map
Posted: Mon Mar 19, 2012 9:19 am
by Spunkster
What is the serial number of the s300 and what is the version of software you are using from Help, About?
Re: having problems after seeting base map
Posted: Wed Mar 21, 2012 2:06 pm
by ategrab20
where can i find that number? also i am running the 1.6.0.0.
Re: having problems after seeting base map
Posted: Wed Mar 21, 2012 4:48 pm
by Spunkster
Download the most recent beta version of software from the downloads section of our website.