Page 1 of 1

poor mans type r bace map

Posted: Thu Mar 08, 2012 3:23 pm
by k1ngp4nd4poormans
neeed a base map for poor mans type r



b16 head and pistons
ls crank and rods
gsr block
arp head studs
5 over
dsm 450 cc
255 fuel pump
ebay fpr
50 trim

the car starts lean out a 3k a little over can someone take a look at this map the car work find till the shop snap two spark plugs in my head then i put it all back together and it started doing this shit need help bad its been 2 years need to drive my baby

Re: poor mans type r bace map

Posted: Fri Mar 09, 2012 10:58 pm
by hpmx18
i tried to view the datalog and idk but you tps wasn't moving but i edited the map from what i saw and would like you to do another datalog with the new 1 i did changes too

Re: poor mans type r bace map

Posted: Sat Mar 10, 2012 7:52 pm
by k1ngp4nd4poormans
same thing happen do you think the tps bad? or my shity dsm injectors











thanks for all your help

Re: poor mans type r bace map

Posted: Sun Mar 11, 2012 11:18 pm
by hpmx18
try removing it off throttle body and make sure its was installed properly cause its suppose to be ready no matter what

Re: poor mans type r bace map

Posted: Sun Mar 11, 2012 11:55 pm
by k1ngp4nd4poormans
But every work good on crome? Just put the hondata on and it started doing this do you think it's the ecu?

Re: poor mans type r bace map

Posted: Mon Mar 12, 2012 12:48 am
by k1ngp4nd4poormans
Try looking at the new datalog and see what you think of everything else like the inj,duty that drop to 0% when it leans out

Re: poor mans type r bace map

Posted: Mon Mar 12, 2012 11:36 am
by k1ngp4nd4poormans
Ok the tps wuz installed the wrong way lol thank you for all you help :-) dut can you lean the car out a little more its running rich 10.00 bad lol

Thanks for all your help my wife going to de happy

Re: poor mans type r bace map

Posted: Tue Mar 13, 2012 12:04 am
by hpmx18
you select the colums that are too rich and lean it out for part throttle