Hondata

Yesterday I received my brand new flashpro.
When trying to lock to the car, I get this message "The calibration in this ecu (civic Si 2006 us/canada - stock) does not match the ecu type (fg2/fa5 civic Si 2007-2011 us/Canada) if this ecu is returned to stock then the existing calibration will be lost", I accept and press ok and get the following message "Could not lock the flashpro to this vehicle"
I have a 2007 Si and have the latest version of flashpro manager installed.
Any help?

Use 'Send Information to Hondata Support'. Thanks.

Hondata wrote:Use 'Send Information to Hondata Support'. Thanks.

Just sent the information.

Ok, got it. We'll have to make a beta release to fix this. It should be available tomorrow.

This is what i'm waiting for.. thx.

Hondata wrote:Ok, got it. We'll have to make a beta release to fix this. It should be available tomorrow.

Thank you. I'll be waiting for the update :)

still waiting, called a guy named "matt" and was told he knew of no such update.. when do you plan on having this update?

ALL M0T0R wrote:still waiting, called a guy named "matt" and was told he knew of no such update.. when do you plan on having this update?

1.2.6.0 is out.
Still unable to lock it to the vehicle.

were can we access this version and if its still not working then we still have a problem and it needs to be resolved

accord2dr02 wrote:were can we access this version and if its still not working then we still have a problem and it needs to be resolved

Go on help>Check for updates
If not go here http://www.hondata.com/forum/viewtopic.php?f=29&t=13392

Just talked to the Tech at Hondata and sent support information again.

imxkal wrote:

accord2dr02 wrote:were can we access this version and if its still not working then we still have a problem and it needs to be resolved

Go on help>Check for updates
If not go here http://www.hondata.com/forum/viewtopic.php?f=29&t=13392

Just talked to the Tech at Hondata and sent support information again.

I have my customer coming back tonight, to try this. We too will send the information, i will be calling hondata as well if this beta does not work.. This obviously a software issue.

ALL M0T0R wrote:

imxkal wrote:

accord2dr02 wrote:were can we access this version and if its still not working then we still have a problem and it needs to be resolved

Go on help>Check for updates
If not go here http://www.hondata.com/forum/viewtopic.php?f=29&t=13392

Just talked to the Tech at Hondata and sent support information again.

I have my customer coming back tonight, to try this. We too will send the information, i will be calling hondata as well if this beta does not work.. This obviously a software issue.

Sounds good. Hopefully Hondata will release an update again to resolve this issue.

1.2.7.0 update fixed the issue.
Thanks for the quick support Hondata! Took less than three hours since releasing 1.2.6.0! :)

1.2.7.0 update fixed the issue.
Thanks for the quick support Hondata! Took less than three hours since releasing 1.2.6.0! :)

Can you link me to the 1.2.7.0?? So i may dl this and quickly tune my customers car?

ALL M0T0R wrote:

1.2.7.0 update fixed the issue.
Thanks for the quick support Hondata! Took less than three hours since releasing 1.2.6.0! :)

Can you link me to the 1.2.7.0?? So i may dl this and quickly tune my customers car?

http://hondata.com/updates/FlashProMana ... 0-Full.exe
Here you go.

imxkal wrote:

ALL M0T0R wrote:

1.2.7.0 update fixed the issue.
Thanks for the quick support Hondata! Took less than three hours since releasing 1.2.6.0! :)

Can you link me to the 1.2.7.0?? So i may dl this and quickly tune my customers car?

http://hondata.com/updates/FlashProMana ... 0-Full.exe
Here you go.

The update, has infact, fixed the problem.. Another happy customer From DDTECH