B18c1 JRSC Map to get it tuned help
Posted: Fri Feb 10, 2012 3:23 pm
I need Help really bad i tried all the maps on Smanager with B18c supercharged but all run really lean on the car.
Car specs......
90 Integra With a GSr Swap with a Jackson Racing supercharger
B18c1 Stock
Jackson racing stock 4.0 pulley
rc 550cc peak n hold
Plx wideband connected on d10 pin
2 1/2 piping with 2 1/4 header
255 fuel pump pressure at 55psi
160f thermostat
80c fan switch
70mm throttle body with 3 inch cai
i just need something not too lean to get the car tuned cause its a 40 min drive to get it tuned. Thanks to all for their help in advance.
P.S
I'm running the s300 without any problems on a p72 with knock sensor
Car specs......
90 Integra With a GSr Swap with a Jackson Racing supercharger
B18c1 Stock
Jackson racing stock 4.0 pulley
rc 550cc peak n hold
Plx wideband connected on d10 pin
2 1/2 piping with 2 1/4 header
255 fuel pump pressure at 55psi
160f thermostat
80c fan switch
70mm throttle body with 3 inch cai
i just need something not too lean to get the car tuned cause its a 40 min drive to get it tuned. Thanks to all for their help in advance.
P.S
I'm running the s300 without any problems on a p72 with knock sensor