Page 1 of 1

need a base map for k20a2 turbo rsx 7psi

Posted: Tue Jan 17, 2012 5:45 pm
by DC5TurboDomo
Need a base map for 03 Rsx Type S
K20a2 6 speed tranny
T3/T4 turbo .63ar at 7psi
Full 3 inch exhuast and d/p
Skunk2 Fuel Rail
Walbro 255 Fuel Pump
RC 520cc injectors

I tried using the Greddy turbo kal basemap but the car idles funny and goes into lean protection when i try to drive it down the street. What I did was use the stock k20a2 map and add fuel the car idles ok at 14.7 but goes lean in boost, i have been playing around with kpro and looking at other threads but no luck.