Page 1 of 1
base calibrations
Posted: Sun Dec 18, 2011 12:28 am
by xjohnkdoex
can the TSX-07-2-tuned calibration for the MT (injen cai, hondata IMG, 25degree vtc) be safely used for an AT?
the only base calibration for AT is the stock equivalent. i'm currently running running a CT-E intake/header, hi-flow cat, hondata IMG/P2R injector base gasket and stock exhaust.
also, thanks so for making this available to the 1G TSX.
Re: base calibrations
Posted: Sun Dec 18, 2011 10:49 am
by Hondata
The MT and AT engines are identical, so calibrations can be switched between them.
Re: base calibrations
Posted: Sun Dec 18, 2011 3:25 pm
by xjohnkdoex
good to know. thanks!!
Re: base calibrations
Posted: Fri Dec 23, 2011 2:02 pm
by lawfer23
dumb question but the stock equivalent option is a stock engine tuned, correct?
Re: base calibrations
Posted: Fri Dec 23, 2011 4:08 pm
by Spunkster
No, it is not tuned
Re: base calibrations
Posted: Fri Dec 23, 2011 4:48 pm
by lawfer23
fair enough...so as a bone stock car this doesn't help till i get an intake at least?
Re: base calibrations
Posted: Fri Dec 23, 2011 11:28 pm
by Hondata
You can still get a fairly big improvement before and after VTEC on a stock engine, but gains are bigger with an intake.
Re: base calibrations
Posted: Fri Dec 23, 2011 11:31 pm
by lawfer23
Fair enough, so using the tuned calibration on the list of calibrations won't hurt my unmodded engine? Sorry just trying to go about things the right way and trying to learn as well. Thanks for the quick replies!