Hondata

First here is what I currently have. ( will be installing it soon)

H22A Sleeved with Darton Sleeves
Weisco 11.5:1 or 12:1 pistons
Eagle rods
P72 with Hondata S200
Stock head for now.....
Walbro 190lph
450cc injectors

93 octane gas

Anyone have a base program for this setup? The motor will soon be up and I need a program to "break in" the motor before tunning it.

Any suggestion

I have broken in 3 fully built h22?s. Take my word for it, use the stock ECU. You don?t want to be chasing fuel pressure issues and the such during the first few miles. Install what works and focus your attention to leaks and loose bolts? Not tweaks and timing maps.

^^^agreed, Im running 11.1 CR with crower 2s and a bunch of other things, and even though its running a bit rough, good old obd2 gets it close enough to break in pretty good......

hey NX!

thing is I dont have a P13 to use. All i have is just the GSR ecu