Hondata

I am totally new to tuning..just put in my hondata and havent learned to use it yet because I can't find an idiots guide on how to do all the simple adjustments. I have a h22a and the ONLY think I have done to it is: eBay header, skunk2 intake and tb.

I tried using the stock h22a map that came with the software but my a/f lambda whatever is at 17. Wherever I rev to in the table it goes up to 17. which is leeeean, right? I drove it 10 feet and it bogged a little so I reversed and parked it. It bogged around 3k rpm.

Anyone got a map that accounts for such simple mods?

Thanks in advance, needed desperately...

--TJ

yup, 17:1 air fuel ratio is very lean, the stock h22 map should do the trick for u. seriously, the stock map should work fine. if u reload the stock map, and go into "parameters" and disable ur closed loop operation, it should run like a champ, well. that way the ecu will not look for O2 input it change the air/fuel behind ur back. u can get more out of ur engine by tuning it at a dyno, but....what kind of oxygen sensor are u using? are u running you stock narrow band O2 sensor, or aftermarket wideband? try the ubove recomondation, if it runs much better, then i would look into ur O2 sensor stuff and things. alittle explaination on the O2 sensor/ input would help as well. good luck, theres nothing better than a hondata, u will grow to love it. congrats.

this will work great for you just change the injector size