Hondata

Posted: **Fri Sep 23, 2011 12:50 am**

Hello guys, need some assistance.
car is ek jdm k20a.
My harness didnt have a cable on the 24pin plug at position B07.
so i wired one up from the reverse solenoid pin#2 , with pin#1 going to ground
Still didnt work.

Using a test light, i opened the ecu lid, car on ign2, and tested the signal from the ecu pin. no power.. Any ideas?

Posted: **Fri Sep 23, 2011 9:22 am**

What ECU do you have?

Posted: **Fri Sep 23, 2011 2:19 pm**

its a PRB ECU. tripled checked on the ECU serial number.

i am aware that 5 speed ecu's do not have reverse lock

Posted: **Fri Sep 23, 2011 2:46 pm**

post your calibration

Posted: **Sat Sep 24, 2011 3:38 am**

can you pm me with your email address ? i'll send it to you directly rather than post up a URL

just trying to keep things private for my tuner.

Posted: **Sun Sep 25, 2011 2:45 pm**

plugged the ecu into a mates car and it seems like power is emmitting from that pin.

Dont think its a kpro issue no more. Thnks anyway

Hondata

Reverse lock not working. Why!?

Reverse lock not working. Why!?

Re: Reverse lock not working. Why!?

Re: Reverse lock not working. Why!?

Re: Reverse lock not working. Why!?

Re: Reverse lock not working. Why!?

Re: Reverse lock not working. Why!?