Page 1 of 2
tps reading -1%
Posted: Sat Sep 17, 2011 2:30 pm
by miaep3
i installed a new tps sensor ktuned. re-calibrated the tps. Now my tps reads negative 1 when the throttle is closed.
i installed my kpro on another car tps read 0% when throttle is closed. i re-calibrated the tps then it also started to read negative 1%. what could be causing this.
Thanks.
Re: tps reading -1%
Posted: Sat Sep 17, 2011 2:34 pm
by miaep3
here is a screen shot
Re: tps reading -1%
Posted: Sat Sep 17, 2011 2:52 pm
by impc
my TPS started reading -1% when upgraded to 1.5.1 (stock TPS sensor), recalibration does not work.
Re: tps reading -1%
Posted: Sat Sep 17, 2011 4:16 pm
by miaep3
impc wrote:my TPS started reading -1% when upgraded to 1.5.1 (stock TPS sensor), recalibration does not work.
same thing happen to me
i installed it on a stock motor with stock tps sensor and still read -1 when i re-calibrated it.
Re: tps reading -1%
Posted: Sat Sep 17, 2011 7:35 pm
by don_killah
impc wrote:my TPS started reading -1% when upgraded to 1.5.1 (stock TPS sensor), recalibration does not work.
Yep, It happened to me too. Something is up with the new kmanager software.
Re: tps reading -1%
Posted: Sun Sep 18, 2011 11:35 am
by impc
if i enter values manually (minimum reading), i can get values to display 0, but engine in some situations does not "understand", that i'm off throttle (probably reading wrong TPS value),
and idle is acting strange (rpm ~1200 and cam. angle surges from 0 to 20)
Re: tps reading -1%
Posted: Mon Sep 19, 2011 4:37 am
by Zoro2006
1.5.1 has some more bugs :(
Re: tps reading -1%
Posted: Mon Sep 19, 2011 5:28 am
by mkulak
miaep3 wrote:here is a screen shot
Make your minimum throttle 10.5 and it should read zero. Whenever I see -1% I add .5 to the minimum number and it is fixed.
Re: tps reading -1%
Posted: Mon Sep 19, 2011 8:34 am
by miaep3
mkulak wrote:miaep3 wrote:here is a screen shot
Make your minimum throttle 10.5 and it should read zero. Whenever I see -1% I add .5 to the minimum number and it is fixed.
okay ill try that.
And yeah there are a few bugs also cause for some reason the idle is also not wanting to stay where it should be.
Re: tps reading -1%
Posted: Mon Sep 19, 2011 9:49 am
by miaep3
miaep3 wrote:mkulak wrote:miaep3 wrote:here is a screen shot
Make your minimum throttle 10.5 and it should read zero. Whenever I see -1% I add .5 to the minimum number and it is fixed.
okay ill try that.
And yeah there are a few bugs also cause for some reason the idle is also not wanting to stay where it should be.
i tried it and nothing still reads -1
Re: tps reading -1%
Posted: Mon Sep 19, 2011 12:03 pm
by Zoro2006
miaep3 wrote:
And yeah there are a few bugs also cause for some reason the idle is also not wanting to stay where it should be.
i tried it and nothing still reads -1
try to install new KManager
http://hondata.com/updates/KManagerV3-0-0.exe
Re: tps reading -1%
Posted: Sun Sep 25, 2011 8:29 am
by miaep3
Zoro2006 wrote:miaep3 wrote:
And yeah there are a few bugs also cause for some reason the idle is also not wanting to stay where it should be.
i tried it and nothing still reads -1
try to install new KManager
http://hondata.com/updates/KManagerV3-0-0.exe
so the new kmanager works with my kpro or its only for the new kpro?
Re: tps reading -1%
Posted: Mon Sep 26, 2011 9:51 am
by Spunkster
It is for all K-Pros.
Re: tps reading -1%
Posted: Fri Sep 30, 2011 6:31 am
by miaep3
Spunkster wrote:It is for all K-Pros.
still reads -1 with the new Kmanager
Re: tps reading -1%
Posted: Fri Sep 30, 2011 11:09 am
by tiger
miaep3 wrote:Spunkster wrote:It is for all K-Pros.
still reads -1 with the new Kmanager
Indeed. I can confirm this as well.