Page 1 of 1
two step problems PLZ HELP!!!!!
Posted: Thu Aug 04, 2011 9:46 pm
by 92-civic eg
hey everyone, so yesturday i was boosting on the highway when all of a sudden my car didint let me go passed 5500 rpm and thats what i have my two step set at and its wierd because mi two step only turnes on when im at a dead stop. but today on my way to work it was working fine and just before i got home i started again......sooooo can someone plz help me out
Re: two step problems PLZ HELP!!!!!
Posted: Fri Aug 05, 2011 9:28 am
by AREA876
Post calibration and datalog of the problem
Do you have the protection setup?
Re: two step problems PLZ HELP!!!!!
Posted: Fri Aug 05, 2011 11:25 am
by 92-civic eg
The only protection setup I have is cold start so it wont let me boost when the car temp is cool
Re: two step problems PLZ HELP!!!!!
Posted: Fri Aug 05, 2011 3:27 pm
by jiggacivic
check your VSS
Re: two step problems PLZ HELP!!!!!
Posted: Sat Aug 06, 2011 8:00 pm
by 92-civic eg
mi current configuration
Re: two step problems PLZ HELP!!!!!
Posted: Sat Aug 13, 2011 8:18 am
by surfingsk8r
jiggacivic wrote:check your VSS
this ^^^
Re: two step problems PLZ HELP!!!!!
Posted: Sat Aug 13, 2011 8:25 am
by surfingsk8r
also after reviewing your parameters ti looks like you have your 2 step set at 4500 not 5500 likeyou said you were having the problem so I would try and get a datalog of the issue and also increase the mph on the 2 step to 6 mph cause vss doesnt really start to read correctly untill after 3 to 5 mph anyhow. hope this helps post datalogs.
Re: two step problems PLZ HELP!!!!!
Posted: Sat Aug 13, 2011 1:08 pm
by stikerguy
try this
Re: two step problems PLZ HELP!!!!!
Posted: Mon Sep 05, 2011 12:28 pm
by Progress
Change your spurk plugs get ngk 7 or 8 heat range