Hondata

I've just got a prc kpro installed on my 03 rsx type S with K24a2 motor but comes across several issues that needed help. 1/ the temperature gauge stops working. It did with the stock prb ecu, but stops working when I installed the prc Kpro. 2/ vss error code comes on while driving. 3/ error code on "vtec malfuntion, oil pressure switch" and won't let me rev pass 4k. If I disable the vtec oil pressure switch, then the car does not have vtec. 4/ The A/C no longer working. The compressor clutch does not engage when the button is pressed.

Can someone help me out here please.

What is the serial number of the K-Pro board inside the ECU and what dealer did you purchase this from?

I'd bought it from another person. And the I am not with the car at the moment so i have to get the serial number later this evening. What can you tell me about the problems I am having?

any help from hondata?

Serial # 05864
hardware 2.16

I need to know how I can enable vtec and disable vss.

The car is 03 rsx type S. with k24a2 swap with bolt on. No internal mods. I used stock k24a2 maps provided from the latest version I'd downloaded. The Ecu is prc based. If I leave the oil pressure switch on then the check engine light comes on and I can't pass 4k rpm. But when I disable it, vtec does not work. And I need to know how to disable the vss error code too.

any help?

What are you looking for specifically? I've already stated everything that listed in the link.

Hondata help is amazing.

You still have not provided the calibration and a datalog showing the problem.