Page 1 of 1
Corrected AFR - bottoms out at 12.25 - Stock AFR 10.14
Posted: Sat Jun 25, 2011 2:48 am
by terryl
Hi maybe i am missing something or doing something wrong ? - when i read my datalogs on a boosted s2000 the lowest corrected AFR only goes down to 12.25- stock AFR is 10.14 at this point which is not very helpful for road tuning - have added a datalog -calibration - this is on a 2008 euro s2000 using older 1.1.6.7 programme
Regards
Re: Corrected AFR - bottoms out at 12.25 - Stock AFR 10.14
Posted: Wed Jul 06, 2011 11:35 am
by terryl
Anyone ?
Re: Corrected AFR - bottoms out at 12.25 - Stock AFR 10.14
Posted: Wed Jul 06, 2011 2:12 pm
by Spunkster
The corrrected reading is a calculated reading based on other parameters and was based on our own testing with independant widebands. When it is flat lining you have reached the limits of the stock sensor and will need to use an idependant wideband and or get it proprely tuned on the dyno.
Re: Corrected AFR - bottoms out at 12.25 - Stock AFR 10.14
Posted: Mon Jul 25, 2011 9:12 pm
by donaldmejr
so which one is correct the Corrected of the OEM one?
Re: Corrected AFR - bottoms out at 12.25 - Stock AFR 10.14
Posted: Tue Jul 26, 2011 9:37 am
by Spunkster
You should be looking at corrected